Avviare e interrompere servizi VMWare su Windows 7

Script batch per avviare i servizi di VMWare

@echo off
echo ======================================================
rem net stop "VMAuthdService"
netsh interface set interface "VMnet1" ENABLED
netsh interface set interface "VMnet8" ENABLED

net start "VMnetDHCP"
net start "VMware NAT Service"

net start "VMwareHostd"
net start "VMUSBArbService"
net start "VMAuthdService"

echo ======================================================
echo VMWARE partito
pause


Script batch per fermare i servizi di VMWare


@echo off
echo ======================================================
rem net stop "VMAuthdService"
netsh interface set interface "VMnet1" DISABLED
netsh interface set interface "VMnet8" DISABLED
net stop "VMAuthdService"
net stop "VMnetDHCP"
net stop "VMware NAT Service"
net stop "VMUSBArbService"
net stop "VMwareHostd"



echo ======================================================
echo VMWARE fermo
pause

windows 7 – script per la configurazione di rete

Impostare l’ip statico da assegnare alla scheda di rete al posto di xx.xx.xx.xx
Impostare l’ip del gateway da assegnare alla scheda di rete al posto di gw.xx.xx.xx

set /p risposta=ATTIVO ESTRA e DISATTIVO DHCP? (s/n):
 IF "%risposta%"=="s" GOTO ESTRA
 IF "%risposta%"=="n" GOTO DHCP
 GOTO End
 :ESTRA
 ECHO Attivo ESTRA
 netsh interface ip set address name="LAN" static xx.xx.xx.xx 255.255.255.0 gw.xx.xx.xx 1
 route add 159.213.89.64 mask 255.255.255.224 172.21.0.1
 route add 192.168.0.0 mask 255.255.255.0 172.21.0.1
 route add 10.10.21.0 mask 255.255.255.0 172.21.0.1
 GOTO End
 :DHCP
 ECHO Attivo DHCP
 route delete 159.213.89.64 mask 255.255.255.224 172.21.0.1
 route delete 192.168.0.0 mask 255.255.255.0 172.21.0.1
 route delete 10.10.21.0 mask 255.255.255.0 172.21.0.1
 netsh interface ip set address name="LAN" dhcp
 netsh interface ip set dnsservers name="LAN" source=dhcp
 :End
 pause

Installazione di Ocserv – openconnect server vpn

Installazione

yum install autoconf automake gcc libtasn1-devel zlib zlib-devel  trousers trousers-devel gmp-devel gmp xz texinfo libnl-devel libnl  tcp_wrappers-libs tcp_wrappers-devel tcp_wrappers dbus dbus-devel  ncurses-devel pam-devel readline-devel bison bison-devel flex gcc  automake autoconf wget
wget http://www.infradead.org/~tgr/libnl/files/libnl-3.2.25.tar.gz
tar -zxvf nettle-2.7.1.tar.gz
cd nettle-2.7.1
./configure --prefix=/opt/
make && make install
tar -xvf gnutls-3.3.10.tar.xz
cd gnutls-3.3.10
export LD_LIBRARY_PATH=/opt/lib/:/opt/lib64/
NETTLE_CFLAGS="-I/opt/include/" NETTLE_LIBS="-L/opt/lib64/ -lnettle"  HOGWEED_CFLAGS="-I/opt/include" HOGWEED_LIBS="-L/opt/lib64/ -lhogweed"  ./configure --prefix=/opt/
wget http://www.carisma.slowglass.com/~tgr/libnl/files/libnl-3.2.24.tar.gz
tar xvf libnl-3.2.24.tar.gz
cd libnl-3.2.24
./configure --prefix=/opt/
make && make install
tar -xvf ocserv-0.8.8.tar.xz
cd ocserv-0.8.8
ls
LIBGNUTLS_CFLAGS="-I/opt/include/" LIBGNUTLS_LIBS="-L/opt/lib/ -lgnutls"  LIBNL3_CFLAGS="-I/opt/include" LIBNL3_LIBS="-L/opt/lib/ -lnl-3  -lnl-route-3" ./configure --prefix=/opt/
make && make install
export LD_LIBRARY_PATH=/opt/lib/:/opt/lib64/

export PATH=$PATH:/opt/bin:/opt/sbin

Configurazione di Ocserv – openconnect server vpn

Generazione dei certificati

mkdir /etc/ocserv/

cd /etc/ocserv/

export LD_LIBRARY_PATH=/opt/lib/:/opt/lib64/

export PATH=$PATH:/opt/bin:/opt/sbin

certtool --generate-privkey --outfile ca-key.pem

cat << _EOF_ > ca.tmpl
cn = "VPN CA"
organization = "Provincia di Prato"
serial = 1
expiration_days = 9999
ca
signing_key
cert_signing_key
crl_signing_key
_EOF_

certtool --generate-self-signed --load-privkey ca-key.pem --template ca.tmpl --outfile ca-cert.pem
certtool --generate-privkey --outfile server-key.pem

cat << _EOF_ > server.tmpl
cn = "openconnect.provincia.prato.it"
organization = "ProvinciaDiPrato"
expiration_days = 9999
signing_key
encryption_key #only if the generated key is an RSA one
tls_www_server
_EOF_

certtool --generate-certificate --load-privkey server-key.pem  --load-ca-certificate ca-cert.pem --load-ca-privkey ca-key.pem  --template server.tmpl --outfile server-cert.pem

certtool --generate-privkey --outfile mpadmin-key.pem

cat << _EOF_ > mpadmin.tmpl
cn = "mpadmin"
unit = "admins"
expiration_days = 9999
signing_key
tls_www_client
_EOF_

certtool --generate-certificate --load-privkey mpadmin-key.pem  --load-ca-certificate ca-cert.pem --load-ca-privkey ca-key.pem  --template mpadmin.tmpl --outfile mpadmin-cert.pem

File di configurazione: ocserv.conf

[root@localhost ocserv]# cat ocserv.conf
# User authentication method. Could be set multiple times and in that case
# all should succeed.
# Options: certificate, pam.
auth = "certificate"
#auth = "plain[./test1.passwd]"
#auth = "pam"

# A banner to be displayed on clients
banner = "Welcome"

# Use listen-host to limit to specific IPs or to the IPs of a provided hostname.
#listen-host = [IP|HOSTNAME]

use-dbus = no

# Limit the number of clients. Unset or set to zero for unlimited.
#max-clients = 1024
max-clients = 16

# Limit the number of client connections to one every X milliseconds
# (X is the provided value). Set to zero for no limit.
#rate-limit-ms = 100

# Limit the number of identical clients (i.e., users connecting multiple times)
# Unset or set to zero for unlimited.
max-same-clients = 2

# TCP and UDP port number
tcp-port = 4444
udp-port = 4444

# Keepalive in seconds
keepalive = 32400

# Dead peer detection in seconds
dpd = 440

# MTU discovery (DPD must be enabled)
try-mtu-discovery = false

# The key and the certificates of the server
# The key may be a file, or any URL supported by GnuTLS (e.g.,
# tpmkey:uuid=xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx;storage=user
# or pkcs11:object=my-vpn-key;object-type=private)
#
# There may be multiple certificate and key pairs and each key
# should correspond to the preceding certificate.
server-cert = /etc/ocserv/server-cert.pem
server-key = /etc/ocserv/server-key.pem

# Diffie-Hellman parameters. Only needed if you require support
# for the DHE ciphersuites (by default this server supports ECDHE).
# Can be generated using:
# certtool --generate-dh-params --outfile /path/to/dh.pem
#dh-params = /path/to/dh.pem

# If you have a certificate from a CA that provides an OCSP
# service you may provide a fresh OCSP status response within
# the TLS handshake. That will prevent the client from connecting
# independently on the OCSP server.
# You can update this response periodically using:
# ocsptool --ask --load-cert=your_cert --load-issuer=your_ca --outfile response
# Make sure that you replace the following file in an atomic way.
#ocsp-response = /path/to/ocsp.der

# In case PKCS #11 or TPM keys are used the PINs should be available
# in files. The srk-pin-file is applicable to TPM keys only (It's the storage
# root key).
#pin-file = /path/to/pin.txt
#srk-pin-file = /path/to/srkpin.txt

# The Certificate Authority that will be used
# to verify clients if certificate authentication
# is set.
#ca-cert = /path/to/ca.pem
ca-cert = /etc/ocserv/ca-cert.pem

# The object identifier that will be used to read the user ID in the client certificate.
# The object identifier should be part of the certificate's DN
# Useful OIDs are:
#  CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1
#cert-user-oid = 0.9.2342.19200300.100.1.1

# The object identifier that will be used to read the user group in the client
# certificate. The object identifier should be part of the certificate's DN
# Useful OIDs are:
#  OU (organizational unit) = 2.5.4.11
#cert-group-oid = 2.5.4.11

# A revocation list of ca-cert is set
#crl = /path/to/crl.pem

# GnuTLS priority string
tls-priorities = "PERFORMANCE:%SERVER_PRECEDENCE:%COMPAT"

# To enforce perfect forward secrecy (PFS) on the main channel.
#tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-RSA"

# The time (in seconds) that a client is allowed to stay connected prior
# to authentication
auth-timeout = 40

# The time (in seconds) that a client is not allowed to reconnect after
# a failed authentication attempt.
#min-reauth-time = 2

# Cookie validity time (in seconds)
# Once a client is authenticated he's provided a cookie with
# which he can reconnect. This option sets the maximum lifetime
# of that cookie.
cookie-validity = 172800

# Script to call when a client connects and obtains an IP
# Parameters are passed on the environment.
# REASON, USERNAME, GROUPNAME, HOSTNAME (the hostname selected by client),
# DEVICE, IP_REAL (the real IP of the client), IP_LOCAL (the local IP
# in the P-t-P connection), IP_REMOTE (the VPN IP of the client). REASON
# may be "connect" or "disconnect".
#connect-script = /usr/bin/myscript
#disconnect-script = /usr/bin/myscript

# UTMP
use-utmp = true

# PID file
pid-file = /var/run/ocserv.pid

# The default server directory. Does not require any devices present.
#chroot-dir = /path/to/chroot

# socket file used for IPC, will be appended with .PID
# It must be accessible within the chroot environment (if any)
socket-file = /var/run/ocserv-socket

# The user the worker processes will be run as. It should be
# unique (no other services run as this user).
run-as-user = nobody
run-as-group = daemon
# Network settings

device = vpns

# The default domain to be advertised
default-domain = provincia.prato.it

ipv4-network = 172.21.0.0
ipv4-netmask = 255.255.0.0
# Use the keywork local to advertize the local P-t-P address as DNS server
ipv4-dns = 172.21.1.29

# The NBNS server (if any)
#ipv4-nbns = 192.168.2.3

#ipv6-address =
#ipv6-mask =
#ipv6-dns =

# Prior to leasing any IP from the pool ping it to verify that
# it is not in use by another (unrelated to this server) host.
ping-leases = false

# Leave empty to assign the default MTU of the device
# mtu =

#route = 192.168.1.0/255.255.255.0
#route = 192.168.5.0/255.255.255.0

#
# The following options are for (experimental) AnyConnect client
# compatibility. They are only available if the server is built
# with --enable-anyconnect
#

# Client profile xml. A sample file exists in doc/profile.xml.
# This file must be accessible from inside the worker's chroot.
# The profile is ignored by the openconnect client.
#user-profile = profile.xml

# Unless set to false it is required for clients to present their
# certificate even if they are authenticating via a previously granted
# cookie. Legacy CISCO clients do not do that, and thus this option
# should be set for them.
#always-require-cert = false

######################################################################################

Creo file di start del servizio: ocserv.start

[root@localhost ocserv]# cat ocserv.start
#!/bin/bash
export LD_LIBRARY_PATH=/opt/lib/:/opt/lib64/
export PATH=$PATH:/opt/bin/:/opt/sbin/
iptables -t nat -F
iptables -t nat -A POSTROUTING -j MASQUERADE
ocserv -c /etc/ocserv/ocserv.conf

########################################################################################